High quality and competitive price 12V 35/55W Standard HID slim xenon Ballast with CE,E-mark certificate

HID ballast 1.Overvoltage,Undervoltage protection 2.Low defective rate 3.excellent heat removal system 4.stable brightness

        JINYAOE  Hot sell  12V 35/55W Standard HID electronic xenon Ballast   

Generally,Ballasts have two different types, Analog, & Digital. And two different sizes,Standard & Slim.Slim ballasts are only needed for vehicles where their is very limited room.

An Analog Ballast is ok for vehicles or machinery where the electrical system is very simple, and where it does not matter if ittakes a bit of time for the ballast to get to full brightness.

A Digital Ballast is good for vehicles or machinery where the electrical system is complicated, or you need a faster start rate, such as switching to high beam on a vehicle. The Latest Digital Ballasts can have intergraded Can-Bus

Ballast Details:

Operating Temperature -40 °C to +105 °C

Steady-state lamp brightness> 4500 lumens (4300k)

Light steady-state time> 47 seconds after the arrival of 50W output

Ballast life> 3000 hours or more

Electrical Output:

Steady-state output power 35W/50W ± 1W

Open-circuit protection shuts down within two seconds

Short-circuit protection within .15 seconds off

The starting current to start the lights 6A ± 0.5A.

Steady-state output voltage above 68V ~ 160V

Starting Voltage <23000V

Electrical Input:

Operating Voltage DC 9V ~ 32V

Instantaneous maximum current to start the lights (5us) <30A

The high-low-voltage lights out> 30V, <8.5V

High and low pressure to start> 30V, <8.5V

Steady-state input current 4.9A ± 0.1A (AC 12.4V)

High quality and competitive price 12V 35/55W Standard HID slim xenon Ballast with CE,E-mark certificate